Progressive's new Tri-Deck Roller Mower is the correct choice of wide area mowers for
municipal grounds care, playing fields, parks, sports facilities, polo fields and sod production.
This versatile mower cuts as low as 1/2" without scalping while it smoothes the surface. It can also
stripe for visual impact and speed re-growth by promoting root-to-soil contact for divot repair. Full
length rollers allow the cutting deck to bridge ribbons while aiding in moisture retention when used
in sod production.
Our superior quality cut comes from high lift blades that creates enough vacuum to lift the grass for
a clean even cut and disperse the clippings evenly over the rollers. Rear rollers also provide extra
protection for safe discharge of clippings and debris. If you need a wide area mower and a quality
cut, you need a Progressive Tri-Deck Roller Mower!

Cutting Width 4.7 meters (15½ Feet) Cutting Height Infinite settings from 1/2" to 4"
360° Turn 0" Uncut Circle SMV Sign Located at back of mower for safety
Ground Clearance 235mm (9¼") Weight 3725 Pounds

TransportDimensions	Length	Width	Height
	14'	84"	97"

Mowing Capacity
Speed (MPH)	2	4	6
Acres Per Hour	3.75	7.5	11.3

Recommended HP 30 Min. - 50 Max. Deck Flexibility 40° Total (15° Down / 25° Up) 12° Front to Back
Hydraulics Requires 1 double acting outlet, all hoses supplied to tractor

Paint Finish Electro-statically powder painted - oven baked finish.

Deck Drive PTO shaft to right angle gear box driving 2 -
"B" section belts to 3 heavy duty spindles.
"A" Frame Hollow structural steel tubing with supports at high stress areas for maximum strength.

Belt Adjustment Easily made by loosening four bolts at slide
plate base and adjusting the slide plate forwards or backwards and retightening.

Hitch 4 positions, with height settings from 10-1/2" to 15"

Safety chain with hook according to Dept. of Transport regulations

Transport Wheels: 6 bolt, 6" Bolt Circle P275/60SR 15" automotive radials

Tongue Weight Transporting –1260 Pounds
Mowing –560 Pounds

Deck Construction A single piece of 3/16" steel plate formed and
welded with supporting members at high stress areas to achieve maximum structural strength.

Cylinders Rear deck: 1 – 2-1/2" x 12" double acting
Wing decks: 2 – 2-1/2" x 12" double acting
Cylinders that come with installed safety restrictor
Spindles: 9 30mm diameter spindles supported by 2greaseable ball bearings.

Screw Jack Side wind jack for easy hook up.

PTO Shafts Telescoping, agricultural PTO drive shafts with proper safety shields. 1-3/8"- 6 spline quick-disconnect yoke with ring lock collars, overrunning and automatic clutch.

Blade Support 3/4" x 2-1/2" x 8" long bar welded to spindleand machined for balance.Two 1/2" bolts holdblade rigid to provide a clean, level cut.

Speeds Tractor PTO-540 RPM

Blades - 3040 RPM
Blade Tip Speed - 18,287 F.P.M. Blades High lift, heat treated, alloy steel blades 5/16" x
2-1/2" x 23" - 3 per deck R.H. & L.H. blades.

Rollers 6" diameter with replaceable shafts
Main Gear Box 4 shaft gear box with 1-3/8"- 6 spline shafts, Delivering power to decks.